The 3M™ 201+ is a versatile masking tape designed for everyday use in professional settings. Its solvent-free rubber adhesive formula provides immediate adhesion on a wide variety of surfaces while allowing for clean removal in one piece without leaving residue.

Its backing made of tan crepe paper tears easily by hand and conforms effectively to irregular surfaces. The tape withstands surface temperatures of up to 93 °C (200 °F) for 30 minutes, making it suitable for various masking, holding, labeling, or assembly applications. Its lightweight unwind allows for quick and precise application.

3M™ 2091 P100 particulate filters provide respiratory protection against oil and non-oil based particles in professional environments requiring a high level of filtration. These filters are classified as P100, NIOSH approved, and are designed to be used with a wide range of reusable 3M™ respirators thanks to their bayonet connection, allowing for quick installation with a quarter turn.

Made with Advanced Electret Media (AEM), they ensure easier breathing while providing high filtration performance. Their lightweight design enhances comfort, and they are suitable for many industrial applications, including welding, sanding, spraying, paint preparation, and other environments generating dust, mists, and airborne particles.

These filters are suitable for concentrations up to 10 times the permissible exposure limit with a half mask, and up to 50 times the limit with a quantitatively tested full mask. They should not be used in immediately dangerous to life or health (IDLH) environments.

Suitable applications

• Paint preparation
• Welding
• Brazing and cutting with a torch
• Metal casting
• Spray coatings
• Restoration / Decontamination
• General manufacturing
• Petrochemical industry
• Food transformation
• Industrial maintenance
• Carpentry, sandblasting, woodworking
• Composite production

Types of filtered particles

• Dusts
• Mists
• Oily and non-oily particles
• Asbestos
• Molds
• Silica

The Adflo 3M spark guard 15-0009-99X02 is a replacement spark guard designed for the Adflo 3M powered air purifying respirator. It installs in the filter cover of the Adflo 3M turbo assembly.

The Adflo 3M spark guard installs in the filter cover of the Adflo 3M turbo assembly.

The cartridge with 3M™ 60921 filter is a combined respiratory protection solution designed to protect against certain organic vapors and particles, including fine dust and airborne contaminants. Certified NIOSH, it offers P100 high-efficiency filtration against both oil and non-oil aerosols.

Thanks to its bayonet connection system, it easily fits a wide range of reusable 3M™ respirators, both half-mask and full-mask. Its design, elle s’adapte facilement à une large gamme de respirateurs réutilisables 3M™, tant à demi‑masque qu’à masque complet. Sa conception is low-profile and curved back to optimize the field of vision and improve the balance of the mask during use.

The cartridges use an activated carbon media to adsorb gaseous contaminants while integrating a high-efficiency particulate filter. They are designed to provide a good balance between breathability, comfort, and lifespan..

Key Features

• Protection against:

  • Organic vapors
  • Particles (P100)

• Certification: NIOSH Approved

• Filtration class: P100

• Connection type: 3M™ Bayonet

• Integrated particulate filter (not separately replaceable)

• Low profile design for better visibility

• Quick installation (quarter turn rotation)

• Low breathing resistance

Compatibility

Compatible with the following 3M™ reusable respirators:

• Series 6000– half masks and full masks
• Series 6500 / 6500QL– half masks
• Series 7500– half masks
• Series 7800S– full masks
• Series FF‑400– full masks
• 3M™ Scott™ AV‑3000 HT and AV‑3000 SureSeal (with bayonet adapter)

Performance

• Protection against:

  • Asbestos
  • Silica
  • Manganese
  • Mold
  • Organic vapors

• Exposure limits:

  • Up to 10 × the permissible exposure limit (PEL) with half mask
  • Up to 50 × the permissible exposure limit (PEL) with properly fitted full mask

Recommended applications

• Painting and surface preparation
• Industrial cleaning
• Solvent handling
• Chemical applications
• Industrial maintenance
• Dusty environments

Benefits

Complete protection

• High efficiency P100 filtration
• Combined protection against vapours and particles

Versatility

• Compatible with multiple 3M respirators
• Reduction in the number of required references

Comfort

• Low breathing resistance
• Compact design improving visibility

Ease of use

• Quick and secure installation
• Simple replacement

The 3M™ 60925 filter cartridge is a combined solution designed to provide respiratory protection against certain organic vapors, formaldehyde, and particles. Certified NIOSH, it provides effective protection in various industrial environments exposed to hazardous contaminants.

Equipped with a P100 filter, it offers high filtration efficiency against both oily and non-oily aerosols. Its bayonet connection system allows for quick and secure installation on a wide variety of reusable 3M™ respirators, both half-mask and full-mask. permet une installation rapide et sécurisée sur une grande variété de respirateurs réutilisables 3M™, tant à demi‑masque qu’à masque complet.

Its design curved low-profile improves the field of vision and balance of the mask while reducing breathing resistance. It is a versatile solution suitable for many industrial applications.

Key features

• Protection against:

  • Certain organic vapors
  • Formaldehyde
  • Particles (P100)

• Certification: NIOSH approved

• Filter class: P100

• Connection type: 3M™ Bayonet

• Low-profile design for better field of vision

• Quick installation with a quarter turn

• Reduced breathing resistance

Compatibility

Compatible with the following 3M™ reusable respirators:

• Series 6000– half masks and full masks
• Series 6500– Rugged Comfort half masks
• Series 7500– half masks
• Series 7800S– full masks
• Series FF‑400– full masks
• 3M™ Scott™ AV‑3000 HT and SureSeal (with bayonet adapter)

Recommended applications

• Chemical manufacturing
• Transfer and handling of chemicals
• Laboratories
• Primary metallurgy
• Pulp and paper industry
• Wood processing
• Dusty or contaminated environments

Benefits

Protection

• High-efficiency P100 filtration
• Combined protection against gases, vapors, and particles

Versatility

• Compatible with multiple series of 3M respirators
• Reduced inventory needs

Comfort

• Low breathing resistance
• Low-profile design enhancing visibility

Ease of use

• Quick installation with bayonet system
• Simple replacement

Earplugs 3M™ E-A-R™ Classic are made of slow recovery foam, providing a perfect fit and effective noise protection. Their cylindrical shape creates a secure seal in the ear canal, reducing unwanted sounds in noisy environments.

Key features:

• Noise Reduction Rating (NRR): 29 dB

• CSA Certification: Class AL
• Material: Slow recovery foam, moisture resistant
• Color: Yellow
• Style: Uncorded
• Insertion: Roll Down Foam

Benefits:

• Extended comfort: Ideal for all-day wear.
• Moisture resistant: Perfect for humid environments.
• Proven reliability: One of the most widely used earplugs in the world.

Recommended applications:

• Construction, manufacturing, maintenance
• Welding, grinding, painting, sandblasting
• Automotive, oil and gas industries

The earplugs 3M™ 1100 are made of slow recovery hypoallergenic polyurethane foam, providing exceptional comfort and reliable protection. Their tapered shape easily fits the ear canal to create an effective barrier against noise.

Key features:

• Noise Reduction Rating (NRR): 29 dB
• CSA Class: AL
• Material: Soft, hypoallergenic foam
• Smooth, dirt-resistant surface: Maintains hygiene
• Style: Uncorded, roll-in insertion
• Color: Orange

Benefits:

• Extended comfort: Ideal for all-day wear.
• Reliable protection: Effectively reduces loud noises.
• Versatile: Suitable for many industrial and commercial applications.

Recommended applications:

• Painting, welding, grinding
• Assembly, demolition, sandblasting
• Industrial maintenance, machine operations

Targeted industries:

• Construction
• Manufacturing
• Automobile
• Oil and gas
• Transport

L’ensemble tampon contre les odeurs nuisibles 35-0699-99X01 Adflo 3M est un accessoire optionnel qui contribue à réduire les odeurs nuisibles*.

• Par odeur nuisible, on entend des concentrations de vapeurs organiques inférieures à la limite d’exposition admissible de l’OSHA ou aux limites d’exposition applicables en milieu de travail, selon la valeur la moins élevée.

*Par odeur nuisible, on entend des concentrations de vapeurs organiques inférieures à la limite d’exposition admissible ou aux limites d’exposition applicables en milieu de travail.

3M offers fit test kits and accessories designed to help your organization meet the CSA Z94.4 standard on respiratory protection and OSHA requirements for fit testing performed on respirators. This accessory is included in a fit test kit used to check the tightness of all respirators against particles or respirators against gases and vapors that have a pre-filter for particles.

The qualitative fit testing device 3M™ FT‑30 (bitter) is designed to check the seal between a respirator and the user's face. It can be used with any particulate respirator or gas/vapor respirator equipped with a prefilter. The test relies on a solution containing sodium saccharin, producing an aerosol with a bitter taste that allows for the detection of a potential leak.

The FT‑30 model meets the performance criteria required by the standard CSA Z94.4 on respirator fit testing as well as by the American standard OSHA 29 CFR 1910.134, Appendix A. The kit includes sensitivity and test solutions, a test hood, nebulizers, and the necessary parts to carry out the complete qualitative test.

This device allows organizations to conduct the required tests as part of respiratory protection programs that comply with Canadian and American regulatory requirements.

The G5-01 Speedglas 3M Work Lamp Kit with lamp, protective plate, and cables is the ultimate assistant for welders. Designed to be used with the high-performance G5-01 Speedglas 3M Welding Helmet, this kit contains all the necessary components to help you illuminate your work environment. Achieve better visibility with the G5-01 Speedglas 3M Work Lamp Kit with lamp, protective plate, and cables.

Welders work in various environments and lighting conditions. When you need help seeing better, equip yourself with the G5-01 Speedglas 3M Work Lamp Kit with lamp, protective plate, and cables. As an all-in-one lighting solution, this kit allows you to be more versatile and better prepared to face a variety of challenges in the workplace; integrate the G5-01 Speedglas 3M Work Lamp Kit with lamp, protective plate, and cables into your setup today.

3M ID 7100217200

The high efficiency Adflo 3M filter against particles for powered air purifying respirators is a replacement filter for the Adflo 3M powered air purifying respirator.

The high efficiency Adflo 3M filter against particles is designed to be used with the Adflo 3M powered air purifying respirator. When used with the respirator, it provides high efficiency filtration. The lightweight, low-profile respirator offers powered air respiratory protection for welders. The Adflo 3M powered air purifying respirator is sold separately.

The internal visor for grinding G5-01 Speedglas 3M is a durable replacement part specifically designed for use with the high-performance G5-01 Speedglas 3M welding helmet. Both anti-fog and scratch-resistant, this visor is designed to handle the rigors of welding while providing a layer of facial protection. When you need to restore your assembly with complete protection, choose the internal visor for grinding G5-01 Speedglas 3M.

If you can't see, you can't weld — it's as simple as that. The internal visor for grinding G5-01 Speedglas 3M helps you stay in action by replacing a damaged or worn visor on the high-performance G5-01 Speedglas 3M welding helmet. Pair it with a variety of other G5-01 Speedglas 3M accessories to create the ultimate welding protection kit.

Key benefits:

• Approximately50% lighterthan the Adflo NiMH battery
• Fast charging:80% in 3 hours, 100% in 6.5 hours
• Compatible with Adflo respirators for industrial and electrical environments
• Robust and durable design for heavy use

Technical specifications:

• Type: Lithium-ion battery
• Compatibility: 3M Adflo powered air purifying respirator
• Runtime: Up to12 hoursdepending on usage conditions
• Certification: NIOSH certifiedCompatible series: 9100-Air, 9100 MP, FX-Air 9100, Adflo
• Compatible Series : 9100-Air, 9100 MP, FX-Air 9100, Adflo

Recommended applications:

• Welding
• Industrial maintenance
• Assembly and manufacturing
• Sanding and grinding
• Use of machinery in electrical environments

The outer protection plate for the 3M Speedglas welding helmet is a replacement part for the 3M Speedglas series 9100 welding helmet.

The outer protection plate for the 3M Speedglas welding helmet is designed to be used with the 3M Speedglas series 9100 welding helmet. The helmets are available in various shapes and sizes to meet your specific needs. They help protect your eyes and face from radiation, heat, and sparks, while providing a clear view of the work to be done. The 3M Speedglas welding helmet is sold separately.

The outer protective plate for the Speedglas 9100 welding helmet from 3M is formulated from a technical resin to withstand higher heat applications. It is recommended for use during high-amperage welding or in conditions where long weld beads may generate radiant heat.

The outer protective plate for the Speedglas 3M welding helmet is a replacement part designed to be used with the Speedglas 3M series 9100 welding helmet. The helmets are offered in various shapes and sizes to meet your specific needs. They help protect your eyes and face from radiation, heat, and sparks while providing a clear view of the work to be done. The Speedglas 3M welding helmet is sold separately.

The 3M™ 60927 filter cartridge is a combined respiratory protection solution offering advanced protection against multiple types of gases, vapors, and particles, including mercury vapors, acid gases, and certain organic vapors. NIOSH certified, it incorporates a P100 filter ensuring high efficiency against both oily and non-oily aerosols. assurant une efficacité élevée contre les aérosols huileux et non huileux.

This cartridge uses an activated carbon media to adsorb gaseous contaminants, combined with a high-efficiency particulate filter. Its design low-profile curved back improves the field of vision and balance of the respirator, while maintaining a low breathing resistance.

Thanks to its bayonet connection, it attaches quickly and securely to a wide range of reusable 3M™ respirators, making it a versatile solution suitable for demanding industrial environments.

Key features

• Protection against:

  • Mercury vapors
  • Acid gases (chlorine, sulfur dioxide, hydrogen sulfide)
  • Certain organic vapors
  • Particles (P100)

• Certification: NIOSH approved

• Filtration class: P100

• Connection type: 3M™ bayonet

• Integrated particulate filter

• Low-profile design for better visibility

• Quick installation (quarter turn)

• Low breathing resistance

Compatibility

Compatible with the following 3M™ reusable respirators:

• Series 6000– half masks and full masks
• Series 6500 / 6500QL– half masks
• Series 7500– half masks
• Series 7800S– full masks
• Series FF-400– full masks
• 3M™ Scott™ AV-3000 HT and AV-3000 SureSeal (with bayonet adapter)

Performance

• Protection against:

  • Mercury
  • Chlorine
  • Sulfur dioxide
  • Hydrogen sulfide
  • Organic vapors
  • Particulates

• Usage limits:

  • Up to 10 × the permissible exposure limit (PEL) with half mask
  • Up to 50 × the permissible exposure limit (PEL) with properly fitted full mask

Benefits

Maximum protection

• Multi-contaminant protection (gases, vapors, and particulates)
• High efficiency P100 filtration

Versatility

• Wide compatibility with 3M respirators
• Reduction of inventory needs

Comfort

• Low breathing effort
• Compact design improving visibility

Ease of use

• Quick and secure installation
• Simple replacement

Key features:

• Filter class: P100 – Maximum protection against oily and non-oily particles.
• Relief from organic vapors at harmful levels (below the OSHA exposure limit).
• Universal compatibility with 3M™ reusable bayonet-style respirators: 
  • Series 6000, 6500, 7500, 7800, FF-400, and full face masks Scott™ AV-3000 HT / SureSeal.
    
• Quick installation with a quarter-turn system.

Recommended applications:

• Welding, brazing, torch cutting, metal pouring.
• Protection against lead, asbestos, cadmium, arsenic, MDA.
• Use in construction, manufacturing, welding, agriculture, pharmaceuticals.

Technical specifications:

• Type: Particle filter with bayonet
• Standard: NIOSH P100
• Workplace exposure limit:Silica: 10, Asbestos: 10, Manganese: 10, Asbestos: 50, Manganese: 50, Silica: 50
• Color: Magenta

3M 8576 Respirator – Optimal Protection Against Particles and Acid Gases

The 3M 8576 respirator is designed to provide superior protection against fine particles and certain acid gases. Equipped with advanced electrostatic filter media, it ensures effective filtration while guaranteeing optimal breathing comfort. This mask is ideal for industrial environments where acid gases, such as sulfur dioxide or hydrogen chloride, are present. Thanks to its lightweight design and comfortable fit, the 3M 8576 is perfect for prolonged use without discomfort. NIOSH certified, it meets the strictest safety standards to ensure your protection.

• Effective Protection: Filters fine particles and certain acid gases.
• Electrostatic Filter Media: Ensures advanced filtration and breathing comfort.
• Lightweight Design: Reduces fatigue during prolonged use.
• Comfortable Fit: Fits perfectly to different face shapes.
• NIOSH Certified: Meets safety standards for optimal protection.
• 3M Cool Flow™ Exhalation Valve: Reduces heat and moisture buildup.

The 15-0099-99X06 Adflo 3M pre-filter is a replacement particle pre-filter designed for the Adflo 3M powered air purifying respirator.

The Adflo 3M pre-filter is designed to be used with the Adflo 3M powered air purifying respirator. It installs in the filter cover of the turbo assembly, between the spark arrestor and the high-efficiency particle filter. The lightweight, low-profile respirator provides powered air respiratory protection for welders. The Adflo 3M powered air purifying respirator is sold separately.